Interfaz De Audio Alta Gama 2 Entradas Ik Multimedia Axe Io

AXE I/O es una interfaz de audio profesional, y controlador, de 2 entradas/5 salidas, diseñada específicamente teniendo en cuenta las necesidades del guitarrista de grabación, que proporciona la mejor calidad de sonido de su clase y potentes funciones dirigidas y específicas para hacer sus grabaciones más rápido, más fácil y mejor que nunca. AXE I/O ofrece un exclusivo circuito de entrada de triple topología completamente discreto, con etapas de entrada JFET y PURE para pasar del sonido transparente al sonido de tubos con un solo interruptor. Su circuito de adaptación de impedancia Z-Tone™, pendiente de patente, interactúa con las pastillas de tu guitarra para brindarte un rango inmenso de flexibilidad tonal que nunca has escuchado antes. Specs AXE I/O Specifications Common Conversion: 24-bit A/D, 24-bit D/A Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz Power: DC IN Device Connection: USB B-Type 2.0 Enclosure: metal sheet Line Outputs 1-2 (Monitor) Configuration: Electronically balanced and floating, automatically compensates level when connection is balanced or unbalanced, tip hot. Output impedance: 150 Ohms balanced, 75 Ohms unbalanced Output Level: 0 dBFS corresponds to +21 dBu Frequency response: From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) Dynamic Range: 116 dB(A) THD+N: -106 dB(A) at -1 dBFS Channels 1-2 crosstalk: 115 dB(A) Line Outputs 3-4 Configuration: Unbalanced Output impedance: 75 Ohms Output Level: 0 dBFS corresponds to +16 dBu Frequency response: From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) Dynamic Range: 115 dB(A) THD+N: -102 dB(A) Channels 3-4 crosstalk: 112 dB(A) Output 5 (Amp output) Configuration: Unbalanced, floating, with selectable ground lift Output impedance: 100 Ohms Output Level: 0 dBFS corresponds to -6 dBu Frequency response: From 10 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) Dynamic Range: 110 dB(A) THD+N: -104 dB(A) Headphones Out Output impedance: Virtually ideal source (zero Ohms) until clipping Maximum Output level: +12 dBu into 50 Ohms load (approx 180 mW) Frequency response: From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) Dynamic Range: 112 dB(A) THD+N: -100 dB(A) Mic Inputs 1-2 Configuration: Class-A discrete differential microphone preamp, pin 2 hot Input impedance: 4 kOhms differential Input level, min gain: 0 dBFS is obtained with a +12 dBu signal at the XLR input Input level, max gain: 0 dBFS is obtained with a -37 dBu signal at the XLR input Frequency response: From 5 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) Dynamic Range: 116 dB(A) THD+N: -106 dB(A) at -10 dBFS Line Inputs 1-2 Configuration: Class-A discrete differential line receiver, tip hot Input impedance: 20 kOhms differential Input level, min gain: 0 dBFS is obtained with a +26 dBu signal at the TRS input Input level, max gain: 0 dBFS is obtained with a -24 dBu signal at the TRS input Frequency response: From 5 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) Dynamic Range: 116 dB(A) THD+N: -106 dB(A) at -10 dBFS Instrument Inputs 1 Configuration: Multiple topology instrument preamp Input impedance, PASSIVE mode: Variable from 1 MOhms down to 2.2 kOhms Input impedance, ACTIVE mode: 10 kOhms Input level, min gain: 0 dBFS is obtained with a +14 dBu signal at the TS input Input level, max gain: 0 dBFS is obtained with a -17 dBu signal at the TS input Frequency response: From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) Dynamic Range: 117 dB(A) THD, PURE mode: 0.0015 % THD, JFET mode: 0.5 % Instrument Inputs 2 Configuration: Hi-Z instrument preamp Input impedance: 1 MOhms Input level, min gain: 0 dBFS is obtained with a +14 dBu signal at the TS input Input level, max gain: 0 dBFS is obtained with a -17 dBu signal at the TS input Frequency response: From 3 Hz to 32 kHz within 0.5 dB (96 kHz sample rate) Dynamic Range: 117 dB(A) THD: 0.006% Connections and Controls Front Panel Two 1/4" instrument input jacks Two analog potentiometers for Input GAIN Two 5 segments input level meter (peak) Two INST, LINE, MIC LEDs Analog potentiometers for Z-Tone control Pick-Up selector (PASSIVE/ACTIVE) Preamp topology selector (JFET/PURE) +48V phantom power switch Tuner switch Tuner display and LEDs USB LEDS MIDI IN/OUT LEDs push-encoder for Presets Monitor knob 1/4" headphones output jack Master potentiometer for main output control 1/4" Amp output jack Rear Panel On/Off power switch External DC power input MIDI I/O 5-pin DIN connectors B-Type USB socket for connecting a computer (Mac/PC) 2 x 1/4" TRS External controllers sockets 2 x 1/4" TRS Balanced floating line outputs 2 x 1/4" TRS Unbalanced line outputs 2 Combo sockets for MIC input and Instrument input (auto selecting) Package includes AXE I/O USB A-Type to USB B-Type connection cable (1.5m/4.32ft) DC power supply Dimensions Size: 23.8cm/9.37" x 21.1cm/8.31" x 5.3cm/2.09" Weight: 1.3kg/2.9lb Compatibility Computers 64-bit application. Requires a 64 bit CPU and Operating System. Mac® (64-bits) Minimal: macOS 10.11 or later. One free USB port. Windows® (64-bits) Minimal: Windows 7 or later. One free USB port.

Subscribete